As the air humidity, it is easy to cause fog on the CD disk, wet CD disk if directly into the host will make the laser head reading speed can not keep up, while the electrical components damp, serious will cause laser head damage. Humidity and high temperature are the main culprits in the aging of electronic components and laser heads. After sun exposure should not be in the car immediately will sound louder, because the working condition of electronic system is with temperature change, immediately increase the volume will not only damage the horn and other electrical appliances, but also affect the life of the host. The other enemy of the laser head is dust. Although the car audio has been considered in the design process of dust, but because the domestic roads vary widely, dust is still important. In the poor road conditions, the car owners should promptly close the window, usually should pay attention to cleaning the car. The vehicle uses the suction disc CD design. Just put the CD in the entrance, and the mechanical structure will automatically inhale the disc. Some owners do not understand the structure, often push the disc into the hand, which will not only damage the disk, but also seriously damage the tray structure.

If the maintenance of horn seal doors and windows lax should be replaced immediately, otherwise it will cause damage to the door leaks in the horn, but also a serious burn host circuit. The speaker basin will change slightly at high temperature. These changes will directly affect the sound quality of the sound, so if the sound quality is different from the past, you can make the corresponding debugging to the professional audio shop.

The disc maintenance disc should not be placed on the instrument panel. The hot summer, the disc in the sun exposure, it is prone to deformation. For the audio part of the tape, the same should be taken to avoid heat and moisture. High temperature will make the tape cassette deformation phenomenon into the host occurs. If the directory above the tape sign up, it is better to tear it apart, otherwise it will cause the failure of the tape can not be returned. When you do not listen or turn off the tape, it is better to drop the tape, because the belt will temporarily press the tape when it is turned off, and it will cause the deformation of the belt pulley for a long time. The disc will be dusty and scratched for long periods of time and wipe along the vertical direction of the audio track when wiping the dust on the dish surface. When using the host computer, you must select a good quality genuine disc. Because there is often a pirated disc or disc surface Buyuan situation, when playing these problems will lead to the laser head jump point fault, directly beneath the laser head of life.